A man and his harvester – EcoLog 590F

EcoLog 590F

In our series about big harvesters we have reached the EcoLog 590F. It was a short visit, due to bad planning from my side, but man – that machine produced some cubic meters quickly! See for yourself in the film here below …

EcoLog 590F
The man and his harvester. Rasmus Jonsson, operator at HR Skog AB.

EcoLog 590F

We have written a lot about the North Swedish machine manufacturer EcoLog this year. The reason is that they have been very active in presenting new models. Also, they merged with Gremo which meant that the product range became even wider. There are a number of articles about that here at NordicWoodJournal.com. One of them you can read here.

Facts & figures

Source: Ecologforestry.com 

Dimensions

Length, mm (in)                                        7767 (306)

Height, min/max, mm (in)                       3430 – 4820 (135 – 190)

Ground clearance, mm (in)                      175 – 1260 (7 – 50)

Weight, kg (lbs)                                        21000 (46297)

Engine, Volvo Penta

Type                                                         6 cyl. D8 – 7,7 l

Emission requirements,

Euromot Stage/Tier                                 Stage V/Tier 4F/Stage III

Power, gross, at 2200 rpm, kW/hp          235/320

Torque, Nm (rpm), (lb-ft)                         1310 (966)

Fuel tank, L (gal US)                                 460 (122)

Transmission

Hydrostatic                                               6 WD, 3 gears

Tractive force, max, kN (lbf)                    190 (42714)

Driving speed, off-road/Driving speed,

road, km/h (mph)                                    0 – 5/0 – 12 (0 – 3/0 – 7)

Tires

Front                                                         710/50×30.5

Front, optional                                         650/65×26.5 / 700/50×30.5

Rear                                                          710/55×34

Rear, optional                                          710/70×34

Machine width, std./optional, mm (in)   3077/3000/2977 (121/118/117)

Steering

Steering angle, degrees                           +/- 44

Leveling

Tilt angle, forward/backward, degrees   +/- 16

Tilt angle, right/left, degrees                   +/- 25,5

Crane

Reach, m (feet)                                         10 – 11 (33 – 36)

Lifting torque, gross, kNm (lb-ft)             310 (228644)

Gross slewing torque standard/

option, kNm (lb-ft)                                   50/70 (36878/51629)

Slewing angle, degrees                            350

Hydraulic system

Crane pump, cc (cu in)                             180 (11)

Oil flow at 1600 rpm for crane,

l/min (US gal/min                                     288/76

Head pump, cc (cu in)                              190 (11,6)

Oil flow at 1600 rpm for head pump,

l/min (US gal/min)                                    304 (80)

Working pressure, MPa (PSI)                   26 (3,8)

Hydraulic tank, l (US gal)                          274 (72)

Electrical system

Voltage, V                                                 24

Batteries, Ah                                            2×145

Alternator, A                                            130

Work lights, number                                20

Type                                                         LED

LogMax                                                     7000

Cutting diameter, mm (in)                       750 (29,5)

EcoLog 590F

Film and more information

You will find out more about the EcoLog products on their website here.

Here is a film from the visit to the forest:

EcoLog 590F handling 4 cbm spruce with LogMax 7000
Total
0
Shares
Previous Article
Ponsse no 16000 delivered

Ponsse no 16000 delivered!

Next Article
Small forwarders

Small forwarders decrease in number

Related Posts